TOOLS
Appropriate solutions for your daily challenges
LTP21
MCT
LTP22 - Lotpistole Ultramapp 2200
THE LIGHT WEIGHT AND HAND HELD TORCH SYSTEM
- Automatic piezo ignition
- Trigger on/off function - no waste of LP gas
- Operates in all positions
- Wide range of quick changeable burners
- For disposable cartridges.
- Ergonomic light weight composite handle or sturdy heavy duty metal handle
- Provides a temperature of 2200° C
| Metaljet and Ultramapp gas form together the most powerful and efficient torch system on the market. A combination of modern combustion technology and unique gas mixture gives you a flame temperature of 2200°C. Sturdy metal handle with | stainless steel high efficient cyclone burner 8707 for instant heat around the pipe. Heating, brazing and soldering works will be done with highest quality efficiency. PLEASE NOTE: Before using upside down, warm up 30 sec. |
TECHNICAL INFORMATION
Working pressure: 2 bar
For ultragas catridge (included): 2206
Can be used with all burners. | NO BURNER INCLUDED! |
TECHNICAL INFORMATION BURNER
- 8702: Pin-point burner for small soft soldering jobs. Gives a precise and stable flame
Burner diameter: 15mm
Gas consumption, at 2 bar: 40g/h
Effect, at 2 bar: 0,5kW
Soft soldering at 2 bar: 10mm - 8704: Standard burner for soft soldering and other small heating jobs. For soft soldering and other small heating jobs.
Burner diameter: 16 m
Gas consumption, at 2 bar: 90g/h
Effect, at 2 bar: 1,2kW
Soft soldering at 2 bar: 18mm - 8706: Cyclone burner for brazing and soft soldering. Intensive and effective short flame that reaches around the pipe.
Burner diameter: 14 mm
Gas consumption, at 2 bar: 170g/h
Effect, at 2 bar: 2,2 kW
Soft soldering: 40 mm
Brazing at 2 bar: 18mm - 8707: Cyclone burner for brazing and soft soldering. High efficient cyclone burner with increased tip diameter.
Burner diameter: 16 mm
Gas consumption, at 2 bar: 230g/h
Effect, at 2 bar: 2,9kW
Soft soldering: 40 mm
Brazing at 2 bar:18mm | - 8708: Hot-air burner or shrinking and paint stripping. Powerful and wind stable hot-air stream.
Burner diameter: 38mm
Gas consumption, at 2 bar: 130g/h
Effect, at 2 bar: 1,7kW - 8710: Soft flame burner or shrinking and heating jobs. Powerful and wind stable soft flame.
Burner diameter: 24 mm
Gas consumption, at 2 bar: 230g/h
Effect, at 2 bar: 3,5 kW
Soft soldering at 2 bar: 22 mm - Copper bit: Made f copper with one pointed and one flat end. For use with burner 8702.
|
| Article nr | Name | Content | Section |
| Y902155 | Lotpistole Ultramapp 2200 | 1pc. | TOOLS |
| Y902206 | Ultramapp 2200°C 750ml | 750ml | TOOLS |
| Y908702 | Pin-Point Burner | 1pc. | TOOLS |
| Y908704 | Standard Burner | 1pc. | TOOLS |
| Y908706 | Cyclon Burner | 1pc. | TOOLS |
| Y908708 | Hot-Air Burner | 1pc. | TOOLS |
| Y908710 | Soft Flame Burner | 1pc. | TOOLS |
| Y908843 | Copper Bit | 1pc. | TOOLS |
