LUBRICANTS

RX - Red-X Grease

HIGH PERFORMANCE GREASE

  • Convenient pin point application
  • Resistant to 190°C
  • Lubricates and prevents rust on any metallic surface
  • Cleans and lubricates in one operation
  • Excellent release agent
  • Flows into surfaces that ordinary grease cannot penetrate
  • Excellent pressure resistance
RED-X GREASE is a new and unique lubricating product that initially sprays a thin penetrating liquid and transforms to a viscious multi-purpose grease within 1 hour. RED-X GREASE lubricates and prevents rust on any metallic surface. The grease film produced is impervious to salt water, moisture and corrosion and is stable to temperatures up to 190°C. The tenacious adherence to metal will not rub or wear off as do ordinary penetrating oils or silicone lubricants. RED-X GREASE can be used for chains, open gears, worm screws and cables and protects against water ingress. RED X GREASE is designed to resist centrifugal forces on high speed mechanisms.

Technical Information

Base: synthetic and mineral oil based lubricant, lithium thickened, Extreme Pressure (EP), Anti Wear (AW) additives and corrosion inhibitors
Physical state: Aerosol
Colour: According to product designation
Odour: characteristic
Recommended operating temperature range: -30° C to 190° C
Initial boiling point and boiling range: -44,5°C
Flash point: -97°C
Auto-ignition temperature: 285 °C
Upper/lower flammability or explosive limits: 1.4 – 10.9 Vol-%
Vapour pressure (at 20°C): 8300 hPa
Desnity (at 20°C): 0,67 g/cm³
Organic solvents: 65%
Loading Test-4ball Weld Load (VKA): appr. 2400N.
Pressure (20ºC): 3.0 bar
Storage: Cool (10°C – 20°C) and dry
Shelf life: 12 months

Application and Use

  • APPLICATION:
    - Construction equipment
    - Automotive, buses, trucks & heavy equipment
    - Equipment rental stores
    - Industrial equipment
    - Farm machinery & implement repair garages
    - Health clubs, spas, gymnasiums
    - Motorcycle repair shops
    - Marine
    - Sewage departments & water departments
  • USE:
    - Use on room temperature
    - Shake well before using
    - Spray thin film on the surface to be lubricated or protected
    - Treat hard to reach areas, insert extention spray tip
    - Let the solvents evaporate, normally this takes approximately 5 minutes
    - Material will start forming into grease
    - Allow product 1 hour to fully work
Informazioni prodotto
MSDS DE V0
MSDS EN V0
MSDS X314001 Red-X Grease 500ml V1
MSDS X314001 Red-X Grease 500ml V3
Article nrNameContentSection
X314001Red-X Grease 500ml500mlLUBRICANTS