CLEANERS AND DEGREASERS

MGS
PU

PFX - Pipe Flux

FAST ACTING DRAIN BLOCKAGE REMOVER

  • Dissolves blockage quick and efficient in 3 to 5minutes
  • Very high specific weight
  • Penetrates through the wastewater
  • Restores drains to full flow
  • Will not damage drains, pipes, fittings and other materials
  • It is biodegradable.
  • PIPE FLUX removes lime, urine stone, soap, grease, hair, protein deposits, compounds of cellulose, tampons and all organic residues.
PIPE FLUX is a biodegradable product, with clears and maintains all blocked drains rapid and effective without damaging the tubes or fittings. Because of the very high specific weight PIPE FLUX penetrates immediately through the waste water and restores drains to full flow very fast. It removes lime, urine stone, soap, grease, hair, protein deposits, compounds of cellulose, panty liners, tampons and all organic residues. PIPE FLUX does not damage plastics, rubber, steel, metal, lead, or PVC piping or surfaces. To use in all situations of blocked pipes and to maintain pipes.

Technical Information

Physical state: Liquid viscous
Colour: dark brown
Odour: characteristic
Initial boiling point and boiling range: 300°C
Density: 1,83 kg/L
Solubility: soluble in water
Specific weight:1,80
Acting time: 3-5 min.
Biodegradable: after 25min neutralized
Concentration: 95% of sulphuric acid
Closing: Cap Child resistant
CAUTION: The product can leave residues or
causing damages on magnesium, stainless steel
and zinc alloys, Acrylic / Fiberglass, ABS (Acrylic
Butadien Styrol), PMMA (Polymetacrylat).
Please use the filling and sealing tube.
Safety: Do not lean over the drain when using the
Product. Use only in well ventilated areas
Safety measures: consult the Safety Data Sheet.
FOR INDUSTRIAL AND COMMERCIAL USE ONLY!

Application and Use

  • PIPE FLUX can be used in showers, floor drains, bathtubs, sinks, Urinals, X-Ray sinks.
    For a blocked drain, remove all excess water and ensure to handle the product with rubber gloves. Pour the product slowly in the blocked pipe and add half litre of water after 30 seconds. Allow to react for about 5 minutes. Then rinse with water. If necessary repeat the process.
    Use only in well ventilated areas.
  • Dosage of the product
    Pipe size small:
    Amount 250 -500 ml / Reaction time 2-3 minutes / Rinse with water for 1-2 min.
    Pipe size 3" - 4":
    Amount 500 -750 ml / Reaction time 3-5 minutes / Rinse with water for 3 min.
    Pipe size 6" - 8":
    Amount 750 -1000 ml / Reaction time 5-10 minutes / Rinse with water for 5 min
  • Never apply, if other chemical substances are present. Do not pour directly on aluminum, galvanized, chromed parts, magnesium and acryl. Note: in the presence of this materials pour out Drain Clean with the help of our filling tube incl. gasket (D492002) and a plastic hopper.
Informazioni prodotto
MSDS X492000 Pipe Flux 750ml V4
Article nrNameContentSection
X492000Pipe Flux 750ml750mlCLEANERS AND DEGREASERS