SURFACE PROTECTION AND TREATMENT

Appropriate solutions for your daily challenges

PGE - Pro Glide

PTFE varnish

Dry and transparent sliding film
Thermoplastic properties
Resists temperatures up to +230°C
Fully dried in 30min.
Very low friction coefficient
Separates different materials
Adheres to plastics and elastomers
Combinable with other sliding agents

PRO GLIDE is a sliding varnish based on poly- tetrafluor ethylene (PTFE) with thermoplastic properties. For the treatment of surfaces sub- jected to extreme frictions. PRO GLIDE is applicable unde conditions where silicone products not acceptable and high temperature or pressure performance is required. It forms a

thin transparent protective film on saw blades milling cutters, tools and machine parts. It prevents the sticking on of resin, wax, adhesives and coolant residues. PRO GLIDE is ideal for particularly incompatible friction materials, plastics/metal, aluminium/ stainless steel mixed frictions, plastic/plastic and rubber based applications.

Technical Information

Physical state: Liquid
Colour: white
Relative density: < 1
Type of solid lubricant:PTFE
Type of binders: flexible thermoplastic resins
Flash point: flash point < 0 °C
Temp. Resistance: -30°C to 230°C
Vapour pressure: 300kPa (3 bar)
Drying time: dust dry: 5 min /fully dried: 30 to 120 min

Consumption: 125 ml / m²
Friction coefficient: 0.07
Shelf life: 12 month
Safety measures: Consult the Safety Data Sheet
(protect from heat influence over 50°C.

Application and Use

Application:
Innovative coating in the metal, plastics and wood industry, works on plastic, metal, aluminium, copper, wood, rubber etc. Shows it´s separating properties especially on incompatible materials. for the treatment of surfaces which subjected by extreme frictions, avoids wear under small gaps and can be used as basis under layer on all moving parts in the mechanical industries.

Use:
PRO GLIDE perfect adhesion is achieved only on very thoroughly cleaned and degreased surfaces. Ultrasonic degreasing is highly recommended for best results. Move the valve towards the surface and spray in a distance of 20 to 30cm. Spray very lightly, to avoid thick layers. The product is dust dry within 5 min. Wait 2hours minimum before use.

Informaţii despre produse
MSDS X161001 Pro Glide 400ml V3

Article nr	Name	Content	Section
X161001	Pro Glide 400ml	400ml	SURFACE PROTECTION AND TREATMENT