SURFACE PROTECTION AND TREATMENT

HT - Halt

RUST TRANSFORMER

  • Eliminates priming, sanding, and other preparation.
  • Transformes rust into a tough, corrosion resistant polymer coating in one impressive process.
  • Changes the dull and dilapidated looks of the machinery or steel structure to a completely restored one.
  • Water-based stain (rust) converting corrosion protection paint
  • non-flammable paint
  • decorative protection of iron and steel objects
HALT is a multi-function, stain converting, stain removing agent, by which also surface coatings providing corrosion protection in a single phase can be created. The agent in the paint removes stains from iron surfaces by a chemical process so that the iron compound created is integrated into the coat of paint generated. By way of the additives in HALT, the coat of paint protects iron objects from further corrosion and also provides a decorative coating. By the preparation stains can be removed, stabilisation and the creation of a corrosion protection coating can be achieved in a single step. The surface created is water-repellent, and is black after thermoplastic drying (softens above 80 °C). The temperature resistance of the applied and already dried Rustcon paint coat is guaranteed up to 70-80°C.

Technical Information

Aggregate State: Liquid
Colour: white
Odour: inconspicuous
pH: > 2 - < 3
Melting point: 0 °C
Freezing point: 0 °C
Initial boiling point and boiling range: 100 °C
Flash point: > 100 °C
Density: 1000 kg/m³		Water solubility: miscible
Application temperature ranges: +5 °C - +30 °C.
Material requirement: 100-150g/m2 in two layers, subject to surface.
Storage: In original, well-sealed packaging, at a temperature above +5°. Frost hazardous product.
Shelf life: Subject to specified storage conditions, 2 years as of production.

Application and Use

  • APPLICATION: It is suitable for stain removal and decorative protection of iron and steel objects, machines, fittings, fences, steel handrails, corroding parts of vehicles, forged iron products. It can be applied to both rusty and clean surfaces. In places less exposed to weather impacts, it can also function as individual coat of paint, however, outdoors and in places exposed to other aggressive impacts (e.g. chemical impact) it is recommended to use covering paint suitable for that particular use. Indoors, recoating by HALT applying two coats of paint will provide appropriate corrosion protection and aesthetic effect for many years.
  • USE: Mechanically remove the loosely attached stain and coat of paint from the metal surface. The surface must be free from any other contamination as well (e.g. fat, oil, dust, soot, etc.). HALT is only effective on metal and stained surfaces, therefore on formerly painted surfaces only the stained parts need to be treated. Before use, stir the paint thoroughly and apply two coats of paint. The paint may be applied by a brush, roll, by spraying or immersion. When applying the first coat of paint, HALTmay be thinned by 5-30% water, as required. Use only as much water that allows for the preparation to be spread well over the surface and for it to get soaked into the stain layer. Apply the second coat of paint now without thinning, after the first coat of paint has dried (after about 2 hours). Outdoors or in other aggressive environments it is recommended to also use covering paint providing appropriate protection (e.g. enamel paint, oil paint, etc.).
Informaţii despre produse
MSDS X402001 Halt 1l V3
MSDS X402005 Halt 5l V3
Article nrNameContentSection
X402001Halt 1l1lSURFACE PROTECTION AND TREATMENT
X402005Halt 5l5lSURFACE PROTECTION AND TREATMENT