ADHESIVES AND SEALANTS

FIX - Fix It

HIGH PERFORMANCE FIXING OF THREADED ROD AND REBAR

  • Comfort security due to colour change of resin during curing time.
  • Easy to dispense and fast curing.
  • ETA certified for rods, rebar, concrete and masonry.
  • Styrene free.
  • Low smell.
  • Reclosable.
  • Non-flammable resin.
  • High performance: medium and heavy loads.
  • Works in damp conditions.
FIX it is a styrene free methacrylate resin for high performance fixing applications of threaded rod in hollow or concrete blocks and rebar into concrete and maronry. FIX IT is a two compenents system (resin & hardener). The chemical reaction between the two components makes the mortar hardening. The resin changes the colour from blue to grey when it is cured. FIX IT is easy to dispense and is fast in curing. FIX IT is specially formulated for structural fixings and very technical sites: metallic racking or work into reinforced concrete.

Technical Information

COMPONENT A
Physical state: Paste
Colour: beige
Odour: characteristic
Vapour density (at 20°C): 0,6
Relative density: 1,68 - 1,69
Water solubility: practically insoluble
Dynamic viscosity: > 100.000 cP

COMPONENT A
Physical state: Paste
Colour: grey
Odour: characteristic
Melting point: 0°C
Relative density: 1,45
Water solubility: practically insoluble
Ratio: 10:1.
Storage: up to 18 months (5°C - 25°C).
For detailed information please see the Technical Data table attached to the product datasheet.
N/mm2 Test Method
Compressive Strength 43,5 EN ISO 604 / ASTM 695
Flexual Strength 15,9 EN ISO 178 / ASTM 790
Flexual Modulus 2803 EN ISO 178 / ASTM 790
Tensile Strength 9,3 EN ISO 527 / ASTM 638
E Modulus 4874,5 EN ISO 527 / ASTM 638
VOC Content A+ Rating

Application and Use

  • INSTALLATION - CONCRETE:
  • 1: Drill hole to specified diameter and depth.
  • 2: Clean hole by brushing and blowing alternately: - Concrete Option 8: 2x blow (hand pump/6bar), 4x brush, 2x blow (hand pump/6bar) - compressed air (6bar) for drilled holes hₑf ≥ 10d or > Ø22mm.
    - Rebar : 2x blow (6bar), 2x brush, 2x blow (6bar).
    - Masonry, solid and perforated : 2x blow (hand pump), 2x brush, 2x blow (hand pump).
  • 3: Dispenser adhesive until uniform colour appears. Inject resin using a dispensing tool. Fill hole one-half to two-thirds full, starting from bottom of hole, withdraw the nozzle after each trigger to prevent air pockets.
  • 4: Insert clean, oil-free threaded rod/rebar, turning slowly until anchor/threaded rod reaches bottom of hole.
  • 5: Threaded rod/rebar can be adjusted and/or more resin added before working time elapses.
  • INSTALLATION - MASONRY:
  • 1: Drill hole to specified diameter and depth.
  • 2: Clean hole by brushing and blowing alternately:
    - Concrete Option 8: 2x blow (hand pump/6bar), 4x brush, 2x blow (hand pump/6bar) - compressed air (6bar) for drilled holes hₑf ≥ 10d or > Ø22mm.
    - Rebar : 2x blow (6bar), 2x brush, 2x blow (6bar).
    - Masonry, solid and perforated : 2x blow (hand pump), 2x brush, 2x blow (hand pump).
  • 3: Insert sleeve.
  • 4: Dispenser adhesive until uniform colour appears. Fill sleeve by withdrawing nozzle one graduation after each trigger pull of dispensing tool.
  • 5: Insert clean, oil-free threaded rod, until it reaches bottom of sleeve.
  • 6: Rod can be adjusted and/or more resin can be added before working time elapses.
  • APPLICATION: Rebar connections, Threaded rod, Fixing of heavy metal structures, Balconnies, Facades, Racking
Informaţii despre produse
MSDS X595003 Fix It 300ml (Comp. A) V4
MSDS X595003 Fix It 300ml (Comp. B) V4
Article nrNameContentSection
X569000XINTEX Caulking Gun 26:1 TOOLS
X595003Fix It 300ml300mlADHESIVES AND SEALANTS
Y595012Mixer Tip Box 280ml10 tips / zipbagTOOLS
Y595013Brush 17mm1pc.TOOLS
Y595014Brush 30mm1pc.TOOLS
Y595015Blowing Pump1pc.TOOLS
Y595016Sleeves M12x50150 pcs.TOOLS
Y595020Brush 12mm1pc.TOOLS