LUBRICANTS

XLB
XA

XI - Xintronic II

MOISTURE DISPLACENT - RESTORER - PRESERVATIVE

  • Low Surface Tension. Low surface tension produces through penetration into inaccessible parts of equipment and motors to quickly displace moisture and form a tough molecular barrier against subsequent moisture and rust.
  • Safe. XINTRONIC II is low in toxicity, non-corrosive, and safe to use on all metals.
  • Immediate Lubrication. XINTRONIC II’s deep penetration immediately lubricates all surfaces. It lubricates each strand of cable and wire ropes to reduce friction and prevent rust and corrosion. XINTRONIC II does not replace regular lubrication of equipment.
  • Unaffected by Temperature. Rapid temperature changes do not affect XINTRONIC II.
  • Vehicle Starting. XINTRONIC II displaces and seals out moisture to aid vehicle starting.
XINTRONIC II is a moisture displacing, penetrating lubricant for mechanical and electrical equipment.

Technical Information

Physical state: liquid
Colour: light brown
Odour: vanilla
Initial boiling point: 110°C
Flash point (ISO 3679): 30°C
Lower explosion limits:0,5 Vol%
Upper explosion limits: 7 Vol%		Density (at 20°C): 0,788 g/cm³
Kinematic viscosity (at 40°C, DIN EN ISO 3104): < 7 mm²/s
Electric strength: 42 kV
Do not store above 49°C. Store in tightly sealed containers.
Safety measures: Consult Safety Data Sheet

Application and Use

  • XINTRONIC II displaces moisture and seals out subsequent moisture and corrosion in electrical motors, relays, controls, switches, line jacks, telephone cross connection boxes, stranded wire rope, instruments, tools, and mechanical parts.
  • Electrical Equipment does not have to be turned off before applying XINTRONIC II, however, concentrated vapors can be ignited by a high energy source. Therefore, keep away from areas where arcing or sparks may occur.
  • Place XINTRONIC II into and on equipment until all surfaces are wet. This will remove condensation. A second layer may be applied to enhance protection. When dry, XINTRONIC II leaves a protective lubricant coating on breakers, contacts, and other movable parts.
Product Information
Article nrNameContentSection
X206005Xintronic II 5l5lLUBRICANTS